- Structure type
- Crawler full feeding
Crawler full feeding
Diesel engine 4C6-100M22
Four-cylinder, in-line, water-cooled,
Cutting table width
Minimum ground clearance
Low speed 0-4. 4, high speed 0-7. 5
Work hour productivity
hm 2 /h
Fuel tank capacity
Outer Diameter × Length
45ml/r HST ,80 gearbox
Grain unloading mode
1.8m unloading,1.4 m³ granary
●It is Equipped with high quality diesel engine , with strong power, large torque reserve and high operating efficiency.
●HST of 45 displacement is matched with the 80 gearbox, with high gearing efficiency and fast operating speed, and the maximum speed can reach 9.5km/h.
●The big radian elastic tooth is adopted, and the elastic tooth can fall below the cutter. The angle of the support of reel is optimized, with better effect of harvest lodging.
●The high quality belt is adopted for the running and working main clutch and driving system, with higher transmission power and reliability.
●The support wheel structure has been newly upgraded, with high-pressure bearing lubrication, good sealing, higher reliability; The support wheel has been widened and the contact area with the crawler has been increased by 16%, which greatly improved the service life of the crawler.
●The hydraulic hose has been upgraded to the double wound steel wire structure, and the brand supply of high-quality is designated, with strong bearing capacity.
●Grid baffle is added at the fan inlet to prevent the grain bag from being inhaled.
●You can choose the sharp end divider to harvest the lodging effect better; and you can choose the circular divider, which is not easy to damage the ridge.
●It is equipped with the independent integrated re-threshing roller, with strong adaptability and better re-threshing effectiveness.